The Wash & Go is the industry leading reverse osmosis powered, spot-free water purification system.
Our powerful and environmentally sound systems transform dockwater into ultra purified, low TDS water, typically under 20ppm. For perfect spot-free, chamois free washdowns, reducing calc and residue in all appliances, glass wear, showers and sinks.
Revered by Captains and crew we have fitted 170+ Wash & Go systems and counting!
The carbon fibre extendable pole and water-fed brush system, makes washing-down safer and more efficient freeing up valuable time for deck crew.
No harsh chemicals or detergents are needed to keep deck and interior ship shape, reducing the environmental impact of your vessel whilst protecting paintwork, coatings and the planet.
.
How it works
01
High TDS (total dissolved solids) water enters from the dock through the 3 pre-filters
02
Water is pressurised by electric pump
03
Pressurised water is then forced through the Reverse osmosis membrane
04
Low TDS water fills the boat fresh water tank
05
Water for wash down is further purified with a de-ionising to provide spot free pure water.
06
A fully carbon telescopic water fed pole is used to assist deck crew to safely reach hard to accesses areas and wash down without the use of soap and the need to wipe down.
Spot-free wash down
No calc residue
Detergent free
Reduces irritation
Wash & Go INSTALLED is expertly designed and retrofitted seamlessly into your vessel by our highly experienced team. Purified water will fill the freshwater tank ensuring quicker detailing throughout the interior as well as spot-free wash downs on deck.
Your Wash & Go will integrate seamlessly with existing systems and aesthetics of the boat and we will personally train your crew in operational procedures.
Learn more about Installation here.
| Model | Production Litre per Hour | Power Supply (Volt) Frequency (Hz) Current (Amp) Power (W) | Pre-Filter Dimensions (mm) | Pump, Motor and Controller Dimensions (mm) | Membrane Assembly Dimensions (mm) |
| WG 300 | 300 | 230V, 50Hz, 4.2Amp, 373W) | W 420 x D 145 x H 700 | W 360 x D 172 x H 306 | W 730 x D 360 x H 135 |
| WG 800 | 800 | 230V. 50Hz, 4.2Amp, 550W | W 420 x D 145 x H 700 | W 360 x D 172 x H 3066 | W 1230 x D 360 x H 135 |
The Wash & Go TRANSIT is a complete pre-built water purification system ready to ‘plug and play’ Despatched to your vessel wherever you are and able to be used immediately as a stand-alone system or plumbed in by your team at a later date.
Choose Horizontal or Vertical configuration
| Model | Production Litre per Hour | Power Supply (Volt) Frequency (Hz) Current (Amp) Power (W) | Pre-Filter Dimensions (mm) | Pump, Motor and Controller Dimensions (mm) | Membrane Assembly Dimensions (mm) |
| WG 300 | 300 | 230V, 50Hz, 4.2Amp, 373W) | W 420 x D 145 x H 700 | W 360 x D 172 x H 306 | W 730 x D 360 x H 135 |
| WG 800 | 800 | 230V. 50Hz, 4.2Amp, 550W | W 420 x D 145 x H 700 | W 360 x D 172 x H 3066 | W 1230 x D 360 x H 135 |
BESPOKE – For high volume requirements or larger vessels where an ‘off the shelf’ solution is not adequate. We work directly with you, re-fit specialists, shipyards, designers and captains to create a custom pure water system that serves even the most complex of needs.
Learn more about Installation here.
Spot-free wash down
No calc residue
Detergent free
Reduces irritation
